The melt flow rate of polymers is a critical parameter that directly affects the processing and end-use properties of plastic products. It refers to the rate at which molten polymer flows through a specific orifice under controlled temperature and pressure conditions. Accurately measuring the melt flow rate of polymers is one of the important parts of quality control. Thus, we at Presto have designed a high-quality polymer testing instrument known as the melt flow index tester-junior model.
This is one of the high-quality lab testing instruments that will accurately test the flow properties of the materials that makes it easy for the manufacturers to conduct MFI tests on the materials. In this blog, we will discuss a brief about the Presto melt flow index tester junior model and how this quality testing instrument is useful in testing the melt flow rate of polymers.
Test MFR of polymers with all-new Presto melt flow index tester junior
Accurately measuring the melt flow rate of polymers is one of the important steps of quality control. A high MFR indicates low viscosity, making it easier to process and mold the polymer. Conversely, a low MFR suggests higher viscosity and reduced processability. Thus, you can easily test the melt flow rate of polymers with our high-quality melt flow index tester.
Our melt flow testing equipment is designed for accurately measuring the melt flow properties of plastic materials. This tester is equipped with various features that enhance its functionality and ease of use.
You can easily measure the melt flow rate of polymers with the melt flow index junior. This ASTM D 1238 melt flow tester will accurately measure the melt flow index of the materials and identify different properties of the materials.
To enhance accuracy and repeatability further, the tester features a digital preset timer. This allows users to set specific time intervals for testing, ensuring consistent testing durations for reliable results.
The Presto Melt Flow Index Tester Junior incorporates a die steel barrel, which provides uniform and consistent heating of the barrel and test cylinder. This promotes reliable and accurate measurement of melt flow properties.
The tester is designed with a separate button for enabling and disabling the heater. This feature offers convenience and control, allowing users to quickly start or stop the heating process as needed. We lay the foundation by explaining the basic concept of melt flow index and its importance in characterizing the flow properties of thermoplastic materials.
The wide mirror platform provided by the tester offers easy monitoring of the melt flow. This ensures that users can closely observe the material's behavior during the testing process, A plastic melt flow index tester facilitates better analysis and understanding of the results.
You can easily ensure the melting rate of polymers with a Presto MFI tester.
Below we have listed the features and technical specifications of this quality testing instrument. Presto is the best melt flow index tester manufacturer in India which provides you with the best quality lab testing instruments.
Features of Presto melt flow index tester junior
The melt flow rate is an essential property of the material that one should consider to ensure accuracy in testing results. The features of the Presto melt flow index tester junior are listed below.
Automatic sample cutting
Microprocessor-based PID controller
Digital Preset Timer for accuracy and repeatability
Die Steel barrel for uniform and consistent heating of barrel/test cylinder.
Heater enable and disable separate button
Wide mirror platform easy to monitor the flow.
Compact and stable structure
Technical specifications of Presto melt flow index tester junior
Temperature Range: Ambient to 350 ºC
Display: Digital 7 Segment
Accuracy: ± 1ºC
Least Count/Resolution: 0.1ºC
Power: 220V, Single phase, 50 Hz
Sample Cutting: Automatic Motorized
Temperature Control: PID Temperature Controller
Timer: Digital Preset up to 999 seconds
Inner Diameter of the heating barrel (cylinder): 9.550mm ± 0.007mm
Inner Diameter of Die: 2.095mm ± 0.005mm
Diameter of piston head: 9.474mm ± 0.007mm
Material of Heating Barrel(Cylinder): Die Steel
Sample Cutting Motor: 2 Torque 7Kg/cm, 60RPM
With these high-end features and technical specifications, one can accurately test the melt flow properties of the materials.
You also checkout other importance testing instruments
bottle cap torque tester, bottle neck cutter, bursting strength tester, conditioning chamber, cupping testing machine, elmendorf tearing strength tester, environmental stress cracking resistance tester, falling dart impact tester, friction tester,
If you need more information about this quality testing equipment like its melt flow index tester price, or anything related, then give us a call at +91-9210903903 or mail us at info@testronixinstruments.com. Our team of technical experts will consult you regarding all your needs & queries.
Content Source Link -Conduct melt flow test on materials with Presto Melt Flow Index Tester-Junior
