What's Clogging Your Drains and How Can You Unclog Them?

There’s nothing quite as frustrating as trying to fix something that’s causing you trouble, only to find that the issue persists even after you’ve fixed it. This is exactly what happens when your drains get clogged. Don’t let this common problem stop you from enjoying your home or business—there are steps you can take to drain cleaning or prevent and clear drain blockages. In this article, we will provide some tips on how to unclog your drains so you can get back to living your life normally.

What Causes Drains to Get Clogged

If you have a clogged drain, it is most likely because something is blocking the drain. Usually, this is caused by hair, soap suds, and other debris. There are a few things that you can do to clear a blockage from your drains.

The most common way to clear a blockage from your drains is to use a plunger. Put the plunger over the drain and push and pull until the obstruction is cleared. If using a plunger is not possible, then you can try using a snake. With the help of a helper, hold the snake over the drain while someone else uses the plunger to push and pull the snake down through the obstruction.

If neither of these methods work, then you will need to call a professional plumber. A professional will be able to remove any blockage with their tools and clear out any residue that was left behind.

How to Unclog Drains

If you have drains that are constantly clogged, it's time to take care of the problem. Here are some tips on how to unclog drains:

1. Clear obstructions with a plunger. If the obstruction is small, try using a plunger to push it down and clear the way. If the obstruction is bigger or tougher, use a plunger with a hose attachment. Aim the nozzle at the obstruction and release the water slowly until the obstruction is cleared.
2. Use a drain cleaner. Another option is using drain cleaner. Pour some down the drain and wait several minutes before trying to use your sink or shower. Reach down into the drain and remove any debris that has been loosened by the cleaner. Be careful not to get chemicals down your drain!
3. Use boiling water. Boil water in a pot and pour it down the drain followed by cold water to cool it off quickly. This technique can break up larger objects that have created blockages, though it won't work on mineral deposits or grease buildup.
4. Clear the blockage with a plunger and plumber's snake. If the obstruction is too large or deep to remove using methods 1-3, you may need to call a plumber to remove it. To do this, use a plunger and a plumber's snake to push and pull on the obstruction until it comes loose. Be careful not to puncture the drain!

What to Do If Drains Keep Getting Clogged

If your drains keep getting clogged, there are a few things you can do to try and unclog them. First, make sure that the drain is not blocked by anything else. If you can see something blocking the drain, immediately clear it away using a plunger or toilet cleaner. Next, use a Snake to clear any objects that are obstructing the drain pipe. Finally, use a Drain Cleaner to Remove All Dirt and debris from the drain pipe.

Conclusion

If your drains are constantly clogged, you may be able to unclog them by following some simple steps. By doing so, you'll be helping to prevent major flooding and other damage that can occur as a result of an overflowing drain. If this is something you've been struggling with for awhile, give these tips a try and see if they help get the drainage moving in the right direction. Or you can take the help of plumbers in Katy.