Product Introduction
鈼?Power module
Function
The power module integrates rectifier, power distribution and monitoring, converts AC or HVDC into stable 48V DC. It supports fault warning and real-time monitoring data reporting to superior network management platform as well as communication with monitoring equipment MBUS.
Appearance
(1) Running light
(2) Alert light
Indicators
LightColorStatusMeaning
RunningGreenOffNo power input (no AC or no battery input)
OnStart/self-check/load (startup and upgrade instantaneous state)
Slow flash (0.5Hz)The communication is normal between the module and network
Quick flash (4Hz)The communication is abnormal between the module and network
AlertRedOffFailure free
OnRectifier module failure/address conflict/monitor module failure
Slow flash (0.5Hz)Rectifier module protection / rectifier power off / communication failure / rectifier power down /parallel failure / AC over-voltage protection / AC under-voltage protection
鈼?Li-ion battery module
Function
The Li-ion battery module provides standby power function for communication equipment, and supplies power to communication equipment when there is no power input from the power module, so as to ensure a normal operation and improve power supply reliability.
Appearance
(1) Running light
(2) Alert light
Indicator Light
Indicator lightColorStatusMeaning
Running lightGreenOffCharger fault / communication fault / parallel operation fault / power off
Flash (1HZ)Charging / discharging / parallel standby status
Alert lightRedOffNo fault
OnProtection / fault
Flash (1HZ)Warning
Installation Instructions
1. Use M6 set screws to fix the hoop retaining plate, holding pole backboard of battery module and of power module.
2. Use the hoop to install the spare parts by holding pole.
3. Use M6 screw to fix the switchover piece of power module on the power module.
4. Use M6 screw to fix the switchover piece of battery module on the battery module.
5. Hang the power module on the holding pole backboard of power module.
6. Hang the battery module on the holding pole backboard of battery module.
7. Lock the top screw.
8. Disassembly is the opposite of installation.
ENDwholesale Site ESS
website:http://www.coslinkess.com/site-ess/